Add/update STM32 headers

firmware/ThirdParty/stm32/stm32l1xx/Include/stm32l1xx.h

@@ -0,0 +1,262 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32L1xx Device Peripheral Access Layer Header File.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *            - Configuration section that allows to select:
+  *              - The STM32L1xx device used in the target application
+  *              - To use or not the peripheral<61>s drivers in application code(i.e.
+  *                code will be based on direct access to peripheral<61>s registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l1xx
+  * @{
+  */
+
+#ifndef __STM32L1XX_H
+#define __STM32L1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32L1)
+#define STM32L1
+#endif /* STM32L1 */
+
+
+/* Uncomment the line below according to the target STM32L device used in your
+   application
+  */
+
+#if !defined (STM32L100xB) && !defined (STM32L100xBA) && !defined (STM32L100xC) && \
+    !defined (STM32L151xB) && !defined (STM32L151xBA) && !defined (STM32L151xC) && !defined (STM32L151xCA) && !defined (STM32L151xD) && !defined (STM32L151xDX) && !defined (STM32L151xE) && \
+    !defined (STM32L152xB) && !defined (STM32L152xBA) && !defined (STM32L152xC) && !defined (STM32L152xCA) && !defined (STM32L152xD) && !defined (STM32L152xDX) && !defined (STM32L152xE) && \
+    !defined (STM32L162xC) && !defined (STM32L162xCA) && !defined (STM32L162xD) && !defined (STM32L162xDX) && !defined (STM32L162xE)
+  /* #define STM32L100xB  */   /*!< STM32L100C6, STM32L100R and STM32L100RB Devices */
+  /* #define STM32L100xBA */   /*!< STM32L100C6-A, STM32L100R8-A and STM32L100RB-A Devices */
+  /* #define STM32L100xC  */   /*!< STM32L100RC Devices */
+  /* #define STM32L151xB  */   /*!< STM32L151C6, STM32L151R6, STM32L151C8, STM32L151R8, STM32L151V8, STM32L151CB, STM32L151RB and STM32L151VB */
+  /* #define STM32L151xBA */   /*!< STM32L151C6-A, STM32L151R6-A, STM32L151C8-A, STM32L151R8-A, STM32L151V8-A, STM32L151CB-A, STM32L151RB-A and STM32L151VB-A */
+  /* #define STM32L151xC  */   /*!< STM32L151CC, STM32L151UC, STM32L151RC and STM32L151VC */
+  /* #define STM32L151xCA */   /*!< STM32L151RC-A, STM32L151VC-A, STM32L151QC and STM32L151ZC */
+  /* #define STM32L151xD  */   /*!< STM32L151QD, STM32L151RD, STM32L151VD & STM32L151ZD */
+  /* #define STM32L151xDX  */  /*!< STM32L151VD-X Devices */
+  /* #define STM32L151xE  */   /*!< STM32L151QE, STM32L151RE, STM32L151VE and STM32L151ZE */
+  /* #define STM32L152xB  */   /*!< STM32L152C6, STM32L152R6, STM32L152C8, STM32L152R8, STM32L152V8, STM32L152CB, STM32L152RB and STM32L152VB */
+  /* #define STM32L152xBA */   /*!< STM32L152C6-A, STM32L152R6-A, STM32L152C8-A, STM32L152R8-A, STM32L152V8-A, STM32L152CB-A, STM32L152RB-A and STM32L152VB-A */
+  /* #define STM32L152xC  */   /*!< STM32L152CC, STM32L152UC, STM32L152RC and STM32L152VC */
+  /* #define STM32L152xCA */   /*!< STM32L152RC-A, STM32L152VC-A, STM32L152QC and STM32L152ZC */
+  /* #define STM32L152xD  */   /*!< STM32L152QD, STM32L152RD, STM32L152VD and STM32L152ZD */
+  /* #define STM32L152xDX  */  /*!< STM32L152VD-X Devices */
+  /* #define STM32L152xE  */   /*!< STM32L152QE, STM32L152RE, STM32L152VE and STM32L152ZE */
+  /* #define STM32L162xC  */   /*!< STM32L162RC and STM32L162VC */
+  /* #define STM32L162xCA */   /*!< STM32L162RC-A, STM32L162VC-A, STM32L162QC and STM32L162ZC */
+  /* #define STM32L162xD  */   /*!< STM32L162QD, STM32L162RD, STM32L162VD and STM32L162ZD */
+  /* #define STM32L162xDX  */  /*!< STM32L162VD-X Devices */
+  /* #define STM32L162xE  */   /*!< STM32L162RE, STM32L162VE and STM32L162ZE */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number
+  */
+#define __STM32L1xx_CMSIS_VERSION_MAIN   (0x02) /*!< [31:24] main version */
+#define __STM32L1xx_CMSIS_VERSION_SUB1   (0x02) /*!< [23:16] sub1 version */
+#define __STM32L1xx_CMSIS_VERSION_SUB2   (0x02) /*!< [15:8]  sub2 version */
+#define __STM32L1xx_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32L1xx_CMSIS_VERSION        ((__STM32L1xx_CMSIS_VERSION_MAIN << 24)\
+                                         |(__STM32L1xx_CMSIS_VERSION_SUB1 << 16)\
+                                         |(__STM32L1xx_CMSIS_VERSION_SUB2 << 8 )\
+                                         |(__STM32L1xx_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32L100xB)
+  #include "stm32l100xb.h"
+#elif defined(STM32L100xBA)
+  #include "stm32l100xba.h"
+#elif defined(STM32L100xC)
+  #include "stm32l100xc.h"
+#elif defined(STM32L151xB)
+  #include "stm32l151xb.h"
+#elif defined(STM32L151xBA)
+  #include "stm32l151xba.h"
+#elif defined(STM32L151xC)
+  #include "stm32l151xc.h"
+#elif defined(STM32L151xCA)
+  #include "stm32l151xca.h"
+#elif defined(STM32L151xD)
+  #include "stm32l151xd.h"
+#elif defined(STM32L151xDX)
+  #include "stm32l151xdx.h"
+#elif defined(STM32L151xE)
+  #include "stm32l151xe.h"
+#elif defined(STM32L152xB)
+  #include "stm32l152xb.h"
+#elif defined(STM32L152xBA)
+  #include "stm32l152xba.h"
+#elif defined(STM32L152xC)
+  #include "stm32l152xc.h"
+#elif defined(STM32L152xCA)
+  #include "stm32l152xca.h"
+#elif defined(STM32L152xD)
+  #include "stm32l152xd.h"
+#elif defined(STM32L152xDX)
+  #include "stm32l152xdx.h"
+#elif defined(STM32L152xE)
+  #include "stm32l152xe.h"
+#elif defined(STM32L162xC)
+  #include "stm32l162xc.h"
+#elif defined(STM32L162xCA)
+  #include "stm32l162xca.h"
+#elif defined(STM32L162xD)
+  #include "stm32l162xd.h"
+#elif defined(STM32L162xDX)
+  #include "stm32l162xdx.h"
+#elif defined(STM32L162xE)
+  #include "stm32l162xe.h"
+#else
+ #error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  ERROR = 0,
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32l1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/ThirdParty/stm32/stm32l1xx/Include/system_stm32l1xx.h

@@ -0,0 +1,124 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32l1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device System Source File for STM32L1xx devices.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l1xx_system
+  * @{
+  */
+
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32L1XX_H
+#define __SYSTEM_STM32L1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32L1xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32L1xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+/*
+*/
+extern const uint8_t AHBPrescTable[16];   /*!< AHB prescalers table values */
+extern const uint8_t APBPrescTable[8];    /*!< APB prescalers table values */
+extern const uint8_t PLLMulTable[9];      /*!< PLL multipiers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32L1xx_System_Exported_Functions
+  * @{
+  */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32L1XX_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/ThirdParty/stm32/stm32l1xx/Release_Notes.html

@@ -0,0 +1,690 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns="http://www.w3.org/TR/REC-html40"><head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<link rel="File-List" href="Release_Notes%20%28package%29_files/filelist.xml">
+<link rel="Edit-Time-Data" href="Release_Notes%20%28package%29_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]-->
+
+
+
+<title>Release Notes for STM32L1xx CMSIS</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>tguilhot</o:LastAuthor> <o:Revision>145</o:Revision> <o:TotalTime>461</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2010-12-13T14:14:00Z</o:LastSaved> <o:Pages>1</o:Pages> <o:Words>358</o:Words> <o:Characters>2045</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>17</o:Lines> <o:Paragraphs>4</o:Paragraphs> <o:CharactersWithSpaces>2399</o:CharactersWithSpaces> <o:Version>11.9999</o:Version> </o:DocumentProperties> </xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:SpellingState>Clean</w:SpellingState> <w:GrammarState>Clean</w:GrammarState> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:Compatibility> <w:UseFELayout/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> </w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" LatentStyleCount="156"> </w:LatentStyles> </xml><![endif]--><style>
+<!--
+/* Font Definitions */
+@font-face
+{font-family:Wingdings;
+panose-1:5 0 0 0 0 0 0 0 0 0;
+mso-font-charset:2;
+mso-generic-font-family:auto;
+mso-font-pitch:variable;
+mso-font-signature:0 268435456 0 0 -2147483648 0;}
+@font-face
+{font-family:"MS Mincho";
+panose-1:2 2 6 9 4 2 5 8 3 4;
+mso-font-alt:"Arial Unicode MS";
+mso-font-charset:128;
+mso-generic-font-family:roman;
+mso-font-format:other;
+mso-font-pitch:fixed;
+mso-font-signature:1 134676480 16 0 131072 0;}
+@font-face
+{font-family:Verdana;
+panose-1:2 11 6 4 3 5 4 4 2 4;
+mso-font-charset:0;
+mso-generic-font-family:swiss;
+mso-font-pitch:variable;
+mso-font-signature:536871559 0 0 0 415 0;}
+@font-face
+{font-family:"\@MS Mincho";
+panose-1:0 0 0 0 0 0 0 0 0 0;
+mso-font-charset:128;
+mso-generic-font-family:roman;
+mso-font-format:other;
+mso-font-pitch:fixed;
+mso-font-signature:1 134676480 16 0 131072 0;}
+/* Style Definitions */
+p.MsoNormal, li.MsoNormal, div.MsoNormal
+{mso-style-parent:"";
+margin:0cm;
+margin-bottom:.0001pt;
+mso-pagination:widow-orphan;
+font-size:12.0pt;
+font-family:"Times New Roman";
+mso-fareast-font-family:"Times New Roman";}
+h1
+{mso-margin-top-alt:auto;
+margin-right:0cm;
+mso-margin-bottom-alt:auto;
+margin-left:0cm;
+mso-pagination:widow-orphan;
+mso-outline-level:1;
+font-size:24.0pt;
+font-family:"Times New Roman";
+mso-fareast-font-family:"MS Mincho";
+font-weight:bold;}
+h2
+{mso-style-next:Normal;
+margin-top:12.0pt;
+margin-right:0cm;
+margin-bottom:3.0pt;
+margin-left:0cm;
+mso-pagination:widow-orphan;
+page-break-after:avoid;
+mso-outline-level:2;
+font-size:14.0pt;
+font-family:Arial;
+mso-fareast-font-family:"MS Mincho";
+font-weight:bold;
+font-style:italic;}
+h3
+{mso-margin-top-alt:auto;
+margin-right:0cm;
+mso-margin-bottom-alt:auto;
+margin-left:0cm;
+mso-pagination:widow-orphan;
+mso-outline-level:3;
+font-size:13.5pt;
+font-family:"Times New Roman";
+mso-fareast-font-family:"MS Mincho";
+font-weight:bold;}
+a:link, span.MsoHyperlink
+{color:blue;
+text-decoration:underline;
+text-underline:single;}
+a:visited, span.MsoHyperlinkFollowed
+{color:blue;
+text-decoration:underline;
+text-underline:single;}
+p
+{mso-margin-top-alt:auto;
+margin-right:0cm;
+mso-margin-bottom-alt:auto;
+margin-left:0cm;
+mso-pagination:widow-orphan;
+font-size:12.0pt;
+font-family:"Times New Roman";
+mso-fareast-font-family:"Times New Roman";}
+@page Section1
+{size:612.0pt 792.0pt;
+margin:72.0pt 90.0pt 72.0pt 90.0pt;
+mso-header-margin:36.0pt;
+mso-footer-margin:36.0pt;
+mso-paper-source:0;}
+div.Section1
+{page:Section1;}
+/* List Definitions */
+@list l0
+{mso-list-id:1315182333;
+mso-list-template-ids:555131286;}
+@list l0:level1
+{mso-level-tab-stop:36.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level2
+{mso-level-tab-stop:72.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level3
+{mso-level-tab-stop:108.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level4
+{mso-level-tab-stop:144.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level5
+{mso-level-tab-stop:180.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level6
+{mso-level-tab-stop:216.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level7
+{mso-level-tab-stop:252.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level8
+{mso-level-tab-stop:288.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l0:level9
+{mso-level-tab-stop:324.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l1
+{mso-list-id:2024673066;
+mso-list-template-ids:154433278;}
+@list l1:level1
+{mso-level-number-format:bullet;
+mso-level-text:\F0A7;
+mso-level-tab-stop:36.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;
+mso-ansi-font-size:10.0pt;
+font-family:Wingdings;}
+@list l1:level2
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:72.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l1:level3
+{mso-level-number-format:bullet;
+mso-level-text:\F0B0;
+mso-level-tab-stop:108.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;
+font-family:Symbol;}
+@list l1:level4
+{mso-level-tab-stop:144.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l1:level5
+{mso-level-tab-stop:180.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l1:level6
+{mso-level-tab-stop:216.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l1:level7
+{mso-level-tab-stop:252.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l1:level8
+{mso-level-tab-stop:288.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l1:level9
+{mso-level-tab-stop:324.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2
+{mso-list-id:2095200852;
+mso-list-type:hybrid;
+mso-list-template-ids:-391638944 67698693 67698691 67698693 67698689 67698691 67698693 67698689 67698691 67698693;}
+@list l2:level1
+{mso-level-number-format:bullet;
+mso-level-text:\F0A7;
+mso-level-tab-stop:36.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;
+font-family:Wingdings;}
+@list l2:level2
+{mso-level-tab-stop:72.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2:level3
+{mso-level-tab-stop:108.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2:level4
+{mso-level-tab-stop:144.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2:level5
+{mso-level-tab-stop:180.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2:level6
+{mso-level-tab-stop:216.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2:level7
+{mso-level-tab-stop:252.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2:level8
+{mso-level-tab-stop:288.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+@list l2:level9
+{mso-level-tab-stop:324.0pt;
+mso-level-number-position:left;
+text-indent:-18.0pt;}
+ol
+{margin-bottom:0cm;}
+ul
+{margin-bottom:0cm;}
+-->
+</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} </style> <![endif]-->
+<style type="disc">
+</style><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="45058"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]-->
+<meta content="MCD Application Team" name="author"></head>
+<body link="blue" vlink="blue">
+<div class="Section1">
+<p class="MsoNormal"><span style="font-family: Arial;"><br>
+</span><span style="font-family: Arial;"><o:p></o:p></span></p>
+<div align="center">
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
+<tbody>
+<tr style="">
+<td style="padding: 0cm;" valign="top">
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
+<tbody><tr>
+<td style="vertical-align: top;"><span style="font-size: 8pt; font-family: Arial; color: blue;"><a href="../../../../../Release_Notes.html">Back to Release page</a></span></td>
+</tr>
+<tr style="">
+<td style="padding: 1.5pt;">
+<h1 style="margin-bottom: 18pt; text-align: center;" align="center"><span style="font-size: 20pt; font-family: Verdana; color: rgb(51, 102, 255);">Release
+Notes for<o:p></o:p> STM32L1xx CMSIS<br>
+</span><span style="font-size: 20pt; font-family: Verdana;"><o:p></o:p></span></h1>
+<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: Arial; color: black;">Copyright
+<EFBFBD> 2017 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p>
+<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt;"><img style="border: 0px solid ; width: 86px; height: 65px;" alt="" id="_x0000_i1025" src="../../../../../_htmresc/logo.bmp"></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+<p class="MsoNormal"><span style="font-family: Arial; display: none;"><o:p>&nbsp;</o:p></span></p>
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900">
+<tbody>
+<tr style="">
+<td style="padding: 0cm;" valign="top">
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">Update history</span></h2>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.2.2
+/ 25-August-2017</span></h3>
+<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"></span></u></b><p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><o:p></o:p></span></u></b>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span><span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+</p>
+<ul style="list-style-type: square;"><li><span style="text-align: left; text-transform: none; text-indent: 0px; letter-spacing: normal; font-family: Verdana; font-style: normal; font-variant: normal; font-weight: normal; font-size: 13px; line-height: normal; font-stretch: normal; white-space: normal; float: none; color: rgb(0, 0, 0); word-spacing: 0px; display: inline ! important;">Removed DATE and VERSION fields from header files</span><span style="font-size: 10pt; font-family: Verdana;">.</span></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 200px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.2.1
+/ 21-April-2017</span></h3>
+<b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"></span></u></b><p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><o:p></o:p></span></u></b>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span><span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+</p>
+<ul style="list-style-type: square;"><li><span style="font-size: 10pt; font-family: Verdana;">General updates:</span></li><ul><li><span style="font-size: 10pt; font-family: Verdana;">Updated CMSIS Device compliancy with MISRA C 2004 rules:</span></li><ul><li><span style="font-size: 10pt; font-family: Verdana;">MISRA C 2004 rule 10.6 </span><span style="font-size: 10pt; font-family: Verdana;">('U' suffix applied to all constants of 'unsigned' type)</span></li><li><span style="font-size: 10pt; font-family: Verdana;">U</span><span style="font-family: Verdana,sans-serif; font-size: 10pt;">pdated system_stm32l1xx.h/.c files.<br></span></li></ul></ul><li><span style="font-family: Verdana,sans-serif; font-size: 10pt;">Aligned Bit definitions for SCB_CFSR register to be compliant&nbsp;with CMSIS Core V4.x and V5.x.</span></li><li><span style="font-family: Verdana,sans-serif; font-size: 10pt;">Renamed RTC_CR_BCK bits in RTC_CR register to RTC_CR_BKP, to be aligned with others series.</span></li><li><span style="font-family: Verdana,sans-serif; font-size: 10pt;">Renamed GPIO_AFRL_AFRLx and GPIO_AFRL_AFRHx bit definitions (from GPIO_AFRL/AFRH registers) to GPIO_AFRL_AFSELx.<br><br></span></li></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.2.0
+/ 01-July-2016 <o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><o:p></o:p></span></u></b>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span><span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+</p>
+<ul style="list-style-type: square;">
+<li>Add macros _Pos and _Msk for each constants.</li>
+<ul>
+<li>For instance:</li>
+<ul>
+<li style="font-family: Courier New;">#define
+ADC_LTR_LT&nbsp;&nbsp;&nbsp;
+&nbsp;((uint32_t)0x00000FFFU)</li>
+</ul>
+<li>Is now provided as:</li>
+<ul>
+<li style="font-family: Courier New;">#define
+ADC_LTR_LT_Pos (0U)&nbsp;</li>
+<li style="font-family: Courier New;">#define
+ADC_LTR_LT_Msk&nbsp;(0xFFFU &lt;&lt; ADC_LTR_LT_Pos)</li>
+<li><span style="font-family: Courier New;">#define
+ADC_LTR_LT&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;ADC_LTR_LT_Msk</span></li>
+</ul>
+</ul>
+</ul>
+<ul style="list-style-type: square;">
+<li>IS_I2S_ALL_INSTANCE is now SPI2 and SPI3
+instead of SPI1 and SPI2.</li>
+<li>Update the TIM_ARR_ARR and TIM_CNT_CNT as they
+support the 32 bit counter feature.</li>
+<li>Add macro IS_TIM_ETR_INSTANCE.</li>
+<li>Add RI_ASCR2_GR6_x with x = 1,2,3,4 if
+applicable.</li>
+<li>Add macro IS_SMBUS_ALL_INSTANCE.</li>
+<li>Set default value for SystemCoreClock to
+2097000 instead of 32000000.</li>
+<li>Correct the presence of TIM9 for some devices
+inside various TIMER macros.</li>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.1.3
+/ 04-March-2016 <o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><o:p></o:p></span></u></b>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span><span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+</p>
+<ul style="list-style-type: square;">
+<li>Add HardFault_IRQn.</li>
+<li>Add BKP5R to BKP19R for RTC_TypeDef for
+stm32l151xba.</li>
+<li>Align bits naming on all stm32 families (ex:
+WWDG_CFR_WDGTB0 -&gt; WWDG_CFR_WDGTB_0).</li>
+<li>Rename RCC_CFGR_MCO_DIVx to RCC_CFGR_MCOPRE_DIVx</li>
+<li>Align Bits naming on all stm32 families (ex:
+EXTI_IMR_MR0 --&gt; EXTI_IMR_IM0)</li>
+<li>Update .icf file to correct empty linker ROM
+Start/End menu, under IAR, for stm32l151xdx, stm32l152xdx and
+stm32l162xdx.</li>
+<li>Rename RCC_CFGR_MCO_x to RCC_CFGR_MCOSEL_x to
+be aligned with Reference Manual.</li>
+<li>Update CMSIS drivers to apply MISRA C 2004 rule
+10.6. (Use U postfix)</li>
+<li>Add defines FLASHSIZE_BASE and UID_BASE</li>
+<li>ADC common instance standardization (new define
+ADC1_COMMON)</li>
+<li>Remove bit GPIO_BRR_BR_x from Cat1 to Cat2
+devices</li>
+<li>Literals "ADC_SMPR1_SMP27, ADC_SMPR1_SMP28,
+ADC_SMPR1_SMP29" are available on Cat4, Cat5 only.</li>
+<li>Add DMA_CNDTR_NDT,&nbsp;DMA_CPAR_PA and
+DMA_CMAR_MA definitions present on other stm32 families.</li>
+<li>Add defines to trig feature inside source code
+based on CMSIS content:</li>
+<ul>
+<li>RTC_TAMPER1_SUPPORT</li>
+<li>RTC_TAMPER2_SUPPORT</li>
+<li>RTC_TAMPER3_SUPPORT</li>
+<li>RTC_BACKUP_SUPPORT</li>
+<li>RTC_WAKEUP_SUPPORT</li>
+<li>RTC_SMOOTHCALIB_SUPPORT</li>
+<li>RTC_SUBSECOND_SUPPORT.&nbsp;</li>
+</ul>
+<ul>
+<li>PWR_PVD_SUPPORT</li>
+</ul>
+<li>Set CMSIS variables PLLMulTable, AHBPrescTable
+and&nbsp;APBPrescTable as external in system_stm32l1xx.h.</li>
+<li>Bit 23 of all EXTI registers (IMR, EMR, ...) is
+not supported on Cat 1 &amp; 2.</li>
+<li>Correct a wrong values for RI_ASCR1_CH_27 to
+RI_ASCR1_CH_30</li>
+<li>Add defines for LCD capacitance</li>
+<li>Suppress SPI1 from I2S_ALL_INSTANCE</li>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.1.2
+/ 09-October-2015 <o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><o:p></o:p></span></u></b>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span><span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+</p>
+<ul style="list-style-type: square;">
+<li>Removing the __IO attribute for PLLMulTable and
+AHBPrescTable. This was leading to issue during C++ initialisation.</li>
+<li>IDR field of CRC_TypeDef changed from uint32_t
+to uint8_t to comply with register structure.</li>
+<li><span style="font-size: 10pt; font-family: Verdana;">Added TIM10
+and TIM11 to IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE).</span></li>
+<li><span style="font-size: 10pt; font-family: Verdana;">Renaming
+USB_CNTR_LP_MODE to USB_CNTR_LPMODE for naming consistancy with other
+bits.</span></li>
+<li><span style="font-size: 10pt; font-family: Verdana;">Renaming
+USB_ISTR_PMAOVRM to USB_ISTR_PMAOVR to use the name of the bit in this
+register.<br>
+</span></li>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.1.1
+/ 31-March-2015 <o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;"><o:p></o:p></span></u></b>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span><span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+</p>
+<ul style="list-style-type: square;">
+<li><span style="font-size: 10pt; font-family: Verdana;">Ensure
+compliancy w/ C++</span></li>
+<li><span style="font-size: 10pt; font-family: Verdana;">Minor update
+on Timer assert.</span></li>
+<li><span style="font-size: 10pt; font-family: Verdana;">Adding
+IS_AES_ALL_INSTANCE macro for product with AES.</span></li>
+</ul>
+<span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold;"></span></span>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.1.0
+/ 16-January-2015 <o:p></o:p></span></h3><p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add
+CMSIS files for new STM32L1 e<span style="font-weight: bold;">X</span>tended
+Devices : <span style="font-weight: bold;">STM32L151xDX</span>,
+<span style="font-weight: bold;">STM32L152xDX</span>
+&amp; <span style="font-weight: bold;">STM32L162xDX</span></span></li></ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V2.0.0
+/ 05-September-2014 <o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span><span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<ul style="list-style-type: square;">
+<li><span style="font-size: 10pt; font-family: Verdana;">Update
+based on STM32Cube specification<br>
+</span></li>
+<li style="font-weight: bold;"><span style="font-size: 10pt; font-family: Verdana;">This version
+has to be used only with </span><span style="font-size: 10pt; font-family: Verdana;">STM32CubeF4</span><span style="font-size: 10pt; font-family: Verdana;"> based
+development</span></li>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.3.1
+/ 06-March-2014<o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32l1xx.h</span><span style="font-size: 10pt; font-family: Verdana;">: update RAM
+functions attribute definition for GNU compiler</span></li>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.3.0
+/ 31-January-2014<o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add support
+for <span style="font-weight: bold; font-style: italic;">STM32L1xx
+XL-density</span> devices </span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-style: italic;">"Ultra Low Power XL-density
+devices: STM32L151x<span style="font-weight: bold;">E</span>xx,
+STM32L152x<span style="font-weight: bold;">E</span>xx
+and STM32L162x<span style="font-weight: bold;">E</span>xx"</span></span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new
+startup file <span style="font-style: italic;">startup_stm32l1xx_xl.s</span>
+for all toolchains</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32l1xx.h</span></li>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new macro
+<span style="font-style: italic;">STM32L1XX_XL</span>
+for XL-density devices<span style="font-style: italic;"></span></span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Update <span style="font-style: italic;">IRQn</span> enumeration
+for <span style="font-style: italic;">STM32L1XX_XL</span></span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">GPIO BRR
+register is declared only for STM32L1XX_HD and STM32L1XX_XL devices</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">All devices </span><span style="font-size: 10pt; font-family: Verdana;">definition </span><span style="font-size: 10pt; font-family: Verdana;">(i.e.
+STM32L1XX_xx) are commented out, user need to define the right
+STM32L1xx device in the toolchain compiler preprocessor</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Extend <span style="font-style: italic;">HSE_STARTUP_TIMEOUT</span>
+and <span style="font-style: italic;">HSI_STARTUP_TIMEOUT</span>
+values to 0x5000</span></li>
+</ul>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.2.1
+/ 19-June-2013<o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32l1xx.h</span></li>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Update <span style="font-style: italic;">RI_TypeDef</span>
+structure by adding registers <span style="font-style: italic;">RI_ASMRx</span>,
+<span style="font-style: italic;">RI_CMRx</span>
+and <span style="font-style: italic;">RI_CICRx</span>
+(x=1..5)</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add bits
+definition for </span><span style="font-size: 10pt; font-family: Verdana;">registers <span style="font-style: italic;">RI_ASMRx</span>, <span style="font-style: italic;">RI_CMRx</span> and <span style="font-style: italic;">RI_CICRx</span> (x=1..5)</span></li>
+</ul>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.2.0
+/ 22-February-2013<o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">stm32l1xx.h</span></li>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">List of
+supported devices: add reference to <span style="font-weight: bold; font-style: italic;">STM32L100xx
+Ultra Low Power Value Line devices</span></span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add <span style="font-style: italic;">SPRMOD</span> bit
+definition in <span style="font-style: italic;">FLASH_OBR</span>
+register</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add <span style="font-style: italic;">RDERR</span> bit
+definition in <span style="font-style: italic;">FLASH_SR</span>
+register</span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Rename <span style="font-style: italic;">FLASH_OBR_nRST_BFB2</span>
+to <span style="font-style: italic;">FLASH_OBR_BFB2</span></span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Delete <span style="font-style: italic;">FLASH_OBR_USER</span>
+define (useless)<br>
+</span></li>
+</ul>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.1.1
+/ 05-March-2012<o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">All source
+files:&nbsp;license disclaimer text update and add link to the
+License file on ST Internet.</span></li>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 191px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.1.0
+/ 24-January-2012<o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Alpha version
+for <span style="font-weight: bold; font-style: italic;">STM32L1xx
+High-density</span> and <span style="font-weight: bold; font-style: italic;">Medium-density
+Plus</span> devices.</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add support
+for </span><span style="font-size: 10pt; font-family: Verdana;"><span style="font-weight: bold; font-style: italic;">STM32L1xx
+High-density</span> and <span style="font-weight: bold; font-style: italic;">Medium-density
+Plus</span></span><span style="font-size: 10pt; font-family: Verdana;"> devices:</span></li>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new
+product define: "#define STM32L1XX_MDP"</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new
+product define: "#define STM32L1XX_HD"</span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Change the
+library version to V1.1.0<br>
+</span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new IRQ
+to support STM32L1XX_HD and </span><span style="font-size: 10pt; font-family: Verdana;">STM32L1XX_MDP
+</span><span style="font-size: 10pt; font-family: Verdana;">vector table</span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new and
+update some Typedef to support new peripherals (AES, SDIO, OPAMP, FSMC,
+I2S)</span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new
+peripherals address mapping</span></li>
+</ul>
+<ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Update bits
+definition</span></li>
+</ul>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new
+startup file "<span style="font-weight: bold; font-style: italic;">startup_stm32l1xx_mdp.s</span>"
+for all toolchains</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Add new
+startup file "<span style="font-weight: bold; font-style: italic;">startup_stm32l1xx_hd.s</span>"
+for all toolchains</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Change the
+RTC "<span style="font-weight: bold; font-style: italic;">CAL</span>"
+register name to "<span style="font-weight: bold; font-style: italic;">CALR</span>"</span></li>
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Update
+registers bits definitions.</span><span style="color: black;"><o:p>
+</o:p></span><br>
+</li>
+</ul>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 167px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.0
+/ 31-December-2010<o:p></o:p></span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes<o:p></o:p></span></u></b></p>
+<ul style="margin-top: 0cm;" type="square">
+<li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-size: 10pt; font-family: Verdana;">Created</span></li>
+</ul>
+<span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;"><span style="font-weight: bold;"></span></span></span><span style="font-size: 10pt; font-family: Verdana;"><span style="text-decoration: underline;"></span></span><span style="font-size: 10pt; font-family: Verdana;"></span><br>
+<span style="font-size: 10pt; font-family: Verdana;"></span>
+<ul style="margin-top: 0cm;" type="square">
+</ul>
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2><div style="text-align: justify;"><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:</span><br>
+            </font>
+            <ol><li><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span></font></li><li><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Redistributions
+in binary form must reproduce the above copyright notice, this list of
+conditions and the following disclaimer in </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">the documentation and/or other materials provided with the distribution.</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span></font></li><li><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Neither
+the name of STMicroelectronics nor the names of its contributors may be
+used to endorse or promote products derived from this software without
+specific prior written permission.</span></font><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span><br></li></ol><font size="-1">
+            <span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span><br>
+            <span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"> WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"> CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.</span></font>
+            
+            </div>
+<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;">
+<hr align="center" size="2" width="100%"></span></div>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt; text-align: center;" align="center"><span style="font-size: 10pt; font-family: Verdana; color: black;">For
+complete documentation on </span><span style="font-size: 10pt; font-family: Verdana;">STM32<span style="color: black;">&nbsp;Microcontrollers
+visit </span><u><span style="color: blue;"><a href="http://www.st.com/internet/mcu/class/1734.jsp" target="_blank">www.st.com/STM32</a></span></u></span><span style="font-size: 10pt; font-family: Verdana;"><a target="_blank" href="http://www.st.com/internet/mcu/family/141.jsp"><u><span style="color: blue;"></span></u></a></span><span style="color: black;"><o:p></o:p></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+</div>
+<p class="MsoNormal"><o:p>&nbsp;</o:p></p>
+</div>
+</body></html>