Fix RTC synchronization after sleep, add many more tests

There were two issues with the tests 1. Incorrect print formats causing incorrect output. 2. The RTC driver was not waiting for the shadow registers to be updated after sleeping, their reset values to be read.
2020-04-22 09:09:31 -07:00
parent 2fa4a5e658
commit f455ce9113
20 changed files with 700 additions and 94 deletions
--- a/firmware/Test/periodic_alarms.cpp
+++ b/firmware/Test/periodic_alarms.cpp
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2020  Max Regan
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <cinttypes>
+#include "printf.h"
+
+#include "Bsp/Drivers/GpioDriver.h"
+#include "Bsp/Drivers/RtcDriver.h"
+#include "Bsp/Drivers/UsartDriver.h"
+#include "Bsp/Drivers/LowPower.h"
+#include "Bsp/LowPowerTaskScheduler.h"
+#include "Bsp/macros.h"
+
+#include "test.h"
+
+#include "Mcu.h"
+
+using BSP::Time;
+using BSP::ReturnCode;
+using BSP::SystemTimer;
+using BSP::time_t;
+
+static BSP::Schedule::LowPowerTaskScheduler<1> g_sched;
+static BSP::UsartDriver g_test_uart(USART1, g_sched);
+static BSP::GpioDriver g_gpioa(GPIOA);
+static BSP::GpioPin g_test_pin(g_gpioa, 6);
+
+static time_t get_time() {
+    time_t time;
+    ReturnCode rc = SystemTimer::get_time(time);
+    if (rc != ReturnCode::OK) {
+        g_test_uart.tx_blocking("Failed while getting the time\r\n");
+        g_test_uart.tx_blocking(test_fail_text);
+        TEST_SPIN();
+    }
+    return time;
+}
+
+
+[[noreturn]] void main() {
+
+    BSP::RtcDriver::init();
+    SystemTimer::set_timer(BSP::RtcDriver::get_system_timer());
+    BSP::LowPower::init();
+
+    g_gpioa.enable();
+    g_test_pin.configure_alternate_function(1);
+    g_test_uart.init();
+
+    g_test_uart.tx_blocking(test_start_text);
+
+    const time_t end = get_time() + Time::millis(5100);
+    const uint32_t pre_alarms = BSP::RtcDriver::get_alarm_count();
+    while (get_time() < end) {}
+    const uint32_t alarms = BSP::RtcDriver::get_alarm_count() - pre_alarms;
+
+    static char buffer[128] = { 0 };
+    snprintf(buffer, sizeof(buffer),
+             "Got %" PRId32 " alarms, expected around %" PRId32 "\r\n",
+             alarms, 5);
+    g_test_uart.tx_blocking(buffer);
+
+    if (alarms > 6 || alarms < 5) {
+            g_test_uart.tx_blocking(test_fail_text);
+    } else {
+        g_test_uart.tx_blocking(test_pass_text);
+    }
+
+    TEST_SPIN();
+}